DRY 100

Thermal Laminating Machine MODEL “DRY 100”
Description

Highly productive and from the complete standard equipment: feeder "SAMAL", right edge alignment of incoming sheets, lateral motorized translation of the winding shaft, side trimming of the unwinding film and winds the trimmed film, chrome calender heated with diathermic oil with external controller, automatic separator independent with abrasive wheel and "INTELLIGENT-KNIFE", automatic stacker with slow moving sheets. 

With the appropriate optionals, the possibility to plasticize in white and time is offered, in contemporary, and/or emboss in line with major economic advantages consequent to the saving of time and to the high production speed. The excellent quality of the result on both surfaces of the sheet is ensured by the presence of two units of independent plasticization. 

In addition to the shiny and opaque thermopolipropilene, this model is also able to work the thermopoliestere easily.

Optionals:

  • kit for the rapid replacement of the calender with embossing cylinder (inclusive) and pressure roller specific rubberized;
  • second coupling unit for plastification in time;
  • cold roll with external cooling unit;
  • separator with a hot blade model "MONOBLOCK";
  • kit "BIOSYLVER" for application "spot" or "full-screen" of metallized foils.
Model
DRY 100/76
Usable working widht (mm)
760
minimum paper size (mm)*
230x280
maximum paper size (mm)
760x1050
mechanical speed (m/min.)**
100
Model
DRY 100/102
Usable working widht (mm)
1050
minimum paper size (mm)*
230x280
maximum paper size (mm)
1050x1140 / 1050x1400
mechanical speed (m/min.)**
100
Model
DRY 100/122
Usable working widht (mm)
1150
minimum paper size (mm)*
230x280
maximum paper size (mm)
1050x1140 / 1050x1400 / 1050x1600
echanical speed (m/min.)**
100
Model
DRY 100/122
Usable working widht (mm)
1250
minimum paper size (mm)*
230x280
maximum paper size (mm)
1050x1400 / 1050x1600
mechanical speed (m/min.)**
100
Model
DRY 100/142
Usable working widht (mm)
1450
minimum paper size (mm)*
230x280
maximum paper size (mm)
145x1600
mechanical speed (m/min.)**
100
Model
DRY 100/162
Usable working widht (mm)
1250
minimum paper size (mm)*
230x280
maximum paper size (mm)
165x2050
mechanical speed (m/min.)**
100
Note
*Il formato minimo può subire variazioni in base al formato massimo lavorabile dalla macchina ed in base ad eventuali opzioni installate sulla macchina
**La velocità di produzione è subordinata alle condizioni di utilizzo, alla qualità dei materiali e all’abilità dell’operatore.
Optionals
- kit per l sostituzione rapida della calandra con cilindro di goffrature (compreso) e rullo pressore gommato specifico
- seconda unità di accoppiamento per la plastificazione in volta
- rullo freddo con centralina di raffreddamento esterna
- separatore a lama calda mod. "MONOBLOCK"
- kit “BIOSYLVER” per l’applicazione “spot” o “full-screen” di foils metallizzati.