DRY 80

Thermal Laminating Machine MODEL “DRY 80”
Description

This fully automatic model is completely equipped in its “base” version: SAMAL feeder, side trimming of the unwinding film and winds the trimmed film, chrome calender heated with diathermic oil with an external controller, automatic separator independent with an abrasive wheel and "INTELLIGENT-KNIFE", automatic stacker with slow motion sheets. 

With the appropriate optionals, the possibility to plasticize in white and time is offered, in contemporary, and/or emboss in line with major economic advantages consequent to the saving of time and to the high production speed. The excellent quality of the result on both surfaces of the sheet is ensured by the presence of two units of independent plasticization. 

In addition to the shiny and opaque thermopolipropilene, this model is also able to work the thermopoliestere easily.

Optionals:

  • right edge alignment of incoming sheets;
  • kit for the rapid replacement of the calender with embossing cylinder (inclusive) and pressure roller specific rubberized;
  • second coupling unit for plastification in time;
  • cold roll with external cooling unit;
  • lateral motorised translation of the winding shaft;
  • separator with a hot blade model "MONOBLOCK";
  • kit "BIOSYLVER" for application "spot" or "full-screen" of metallized foils.
Model
DRY 80/76
Usable working widht (mm)
760
minimum paper size (mm)*
230X250
maximum paper size (mm)
760X1050
mechanical speed (m/min.)**
80
Model
DRY 80/102
Usable working widht (mm)
1050
minimum paper size (mm)*
230x250
maximum paper size (mm)
1050x1140 / 1050x1400
mechanical speed (m/min.)**
80
Model
DRY 80/122
Usable working widht (mm)
1150
minimum paper size (mm)*
230x250
maximum paper size (mm)
1050x1140 / 1050x1400 / 1050x1600
echanical speed (m/min.)**
80
Model
DRY 80122
Usable working widht (mm)
1250
minimum paper size (mm)*
230x250
maximum paper size (mm)
1050x1400 / 1050x1600
mechanical speed (m/min.)**
80
Model
DRY 80/142
Usable working widht (mm)
1450
minimum paper size (mm)*
230X250
maximum paper size (mm)
1450X1600
mechanical speed (m/min.)**
80
Model
DRY 80/162
Usable working widht (mm)
1250
minimum paper size (mm)*
230x250
maximum paper size (mm)
1650x2050
mechanical speed (m/min.)**
80
Note
*Il formato minimo può subire variazioni in base al formato massimo lavorabile dalla macchina ed in base ad eventuali opzioni installate sulla macchina
**La velocità di produzione è subordinata alle condizioni di utilizzo, alla qualità dei materiali e all’abilità dell’operatore.
Optionals
- squadra di allineamento laterale dei fogli in ingresso
- kit per l sostituzione rapida della calandra con cilindro di goffrature (compreso) e rullo pressore gommato specifico
- seconda unità di accoppiamento per la plastificazione in volta
- rullo freddo con centralina di raffreddamento esterna
- traslazione laterale motorizzata dell'albero svolgitore
- separatore a lama calda mod. "MONOBLOCK"
- kit “BIOSYLVER” per l’applicazione “spot” o “full-screen” di foils metallizzati.